Unit converter · Free · No sign-up
Metres to Feet
To convert metres to feet, divide by 0.3048, or multiply by 3.2808. 2.4 m ÷ 0.3048 = 7.87 feet. That is 7 ft 10.5 in, not 7 ft 8.7 in: the decimal is hundredths of a foot, not inches. The converter gives decimal feet, feet and inches, and the nearest eighth of an inch.
Type metres.
| Shown as | Value |
|---|---|
| Feet, as a decimal | 7.87 ft |
| Feet and inches | 7 ft 10.5 in |
| Feet and inches, nearest 1/8 inch | 7 ft 10 1/2 in |
| Inches | 94.49 in |
| Yards | 2.62 yd |
The figures above are an example: put in your own. A decimal comma (2,4) works too. Worked out in this browser and kept there; nothing is sent anywhere.
Type a length in metres and read it in feet three ways: as a decimal, as feet and inches to a tenth of an inch, and to the nearest eighth of an inch for a tape. Inches and yards are given too.
Metres to feet is a division by 0.3048, the exact length of a foot in metres. The answer is almost never a whole number of feet, so it is always rounded, and the page says how.
- No sign-up
- Nothing uploaded
- Exact factors
- Works offline
- Says when it rounds
Key facts
| Detail | Answer |
|---|---|
| Formula | feet = metres ÷ 0.3048 |
| Example | 2.4 m = 7.87 ft = 7 ft 10.5 in |
| 1 metre | 3.2808398950… ft = 3 ft 3.37 in |
| Quick estimate | Multiply by 3 and add 10%: 0.6% high |
| Decimal feet | Hundredths of a foot, not inches |
| Where your numbers are kept | This browser only |
How to convert metres to feet and inches
Divide, then split the decimal into inches.
Divide by 0.3048
2.4 ÷ 0.3048 = 7.874 ft.
Keep the whole feet
7 ft.
Turn the decimal into inches
0.874 × 12 = 10.49 in.
Round the inches
To a tenth, 10.5; to an eighth, 10 1/2.
Write it out
7 ft 10.5 in, or 7′ 10½″.
Who converts metres to feet
People with a metric figure and a reader, tape or rule book in feet.
Home buyers abroad
Ceiling heights and room sizes in feet.
Divers and swimmers
Depths and pool lengths in feet.
Athletics fans
Field event marks in feet and inches.
Builders
A metric drawing on an imperial tape.
Drone pilots
Height limits set in feet.
Travellers
Elevations and bridge clearances in feet.
Decimal feet are not feet and inches
Metres to feet gives a decimal, and a decimal number of feet looks like feet and inches when it is not. 1.75 m is 5.74 ft, which reads as “5 foot 7” and is in fact 5 ft 8.9 in, nearly two inches more. The digits after the point are hundredths of a foot; an inch is 0.0833 of a foot. This page always gives both, so the decimal cannot be misread.
| Metres | Decimal feet | Looks like | Actually |
|---|---|---|---|
| 1.6 m | 5.25 ft | 5 ft 2.5 in | 5 ft 3 in |
| 1.75 m | 5.74 ft | 5 ft 7.4 in | 5 ft 8.9 in |
| 2.4 m | 7.87 ft | 7 ft 8.7 in | 7 ft 10.5 in |
| 3 m | 9.84 ft | 9 ft 8.4 in | 9 ft 10.1 in |
To turn decimal feet into feet and inches by hand, keep the whole feet and multiply the decimal part by 12: 0.87 × 12 = 10.4, so 7.87 ft is 7 ft 10.4 in (10.5 from the unrounded figure). For a builder’s tape, the converter also gives the nearest 1/8 inch, 7 ft 10 1/2 in for 2.4 m.
Metres to feet and inches chart
A chart for the direction people convert in: metric lengths that need to be read on an imperial tape or told to someone who thinks in feet. Each row gives decimal feet, feet and inches to a tenth, and feet and inches to the nearest eighth of an inch.
| Metres | Decimal feet | Feet and inches | Nearest 1/8 inch |
|---|---|---|---|
| 0.5 m | 1.64 ft | 1 ft 7.7 in | 1 ft 7 5/8 in |
| 1 m | 3.28 ft | 3 ft 3.4 in | 3 ft 3 3/8 in |
| 1.5 m | 4.92 ft | 4 ft 11.1 in | 4 ft 11 in |
| 1.6 m | 5.25 ft | 5 ft 3 in | 5 ft 3 in |
| 1.75 m | 5.74 ft | 5 ft 8.9 in | 5 ft 8 7/8 in |
| 1.8 m | 5.91 ft | 5 ft 10.9 in | 5 ft 10 7/8 in |
| 2 m | 6.56 ft | 6 ft 6.7 in | 6 ft 6 3/4 in |
| 2.4 m | 7.87 ft | 7 ft 10.5 in | 7 ft 10 1/2 in |
| 2.7 m | 8.86 ft | 8 ft 10.3 in | 8 ft 10 1/4 in |
| 3 m | 9.84 ft | 9 ft 10.1 in | 9 ft 10 1/8 in |
| 5 m | 16.4 ft | 16 ft 4.9 in | 16 ft 4 7/8 in |
| 10 m | 32.81 ft | 32 ft 9.7 in | 32 ft 9 3/4 in |
| 20 m | 65.62 ft | 65 ft 7.4 in | 65 ft 7 3/8 in |
| 50 m | 164.04 ft | 164 ft 0.5 in | 164 ft 1/2 in |
| 100 m | 328.08 ft | 328 ft 1 in | 328 ft 1 in |
| 1000 m | 3,280.84 ft | 3,280 ft 10.1 in | 3,280 ft 10 1/8 in |
None of these is exact. A metre is 1/0.3048 = 3.2808398950… feet, a decimal that never ends, so every figure here is rounded, and the rounding is stated: two places for decimal feet, a tenth of an inch, or the nearest eighth.
Pools, platforms, tracks and ceilings
Metric lengths are converted into feet mostly for sport, buildings and anything to do with height or depth that an American or British reader will picture in feet.
| What | Metres | Feet | Feet and inches |
|---|---|---|---|
| Olympic diving platform | 10 | 32.81 | 32 ft 10 in |
| Olympic pool length | 50 | 164.04 | 164 ft 1 in |
| Sprint | 100 | 328.08 | 328 ft 1 in |
| Football pitch length (a common size) | 105 | 344.49 | 344 ft 6 in |
| Standard running track lap | 400 | 1,312.34 | 1,312 ft 4 in |
| UK new-build ceiling | 2.4 | 7.87 | 7 ft 10 in |
| Basketball hoop height (3.05 m) | 3.05 | 10.01 | 10 ft 0 in |
A basketball hoop shows the conversion going the other way round in history: the rule height is 10 feet, and FIBA states it as 3.05 m, which is 10 ft 0.1 in. When a metric figure was set from a round number of feet, converting it back gives the round number plus a little. For a swimming pool, the swim lengths calculator converts lengths of a metre pool into yards and miles.
What this converter does not do
This converts metres to feet with the international foot (0.3048 m). It does not convert square or cubic metres: a square metre is 10.7639 square feet, not 3.28. For a person’s height in feet and inches use the height converter, which rounds to the inch and accepts centimetres; for kilometres and miles, the km to miles converter.
This converter or a decimal-only one
What this page adds to a typical one-formula converter.
| This converter | A typical converter | |
|---|---|---|
| Feet and inches | To a tenth and to 1/8 inch | Decimal feet only |
| Decimal feet explained | 5.74 ft shown as 5 ft 8.9 in | Left to be misread |
| Rounding carry | Rounded on the total inches | Sometimes 12 inches |
| Exact or rounded | Says which | Unlabelled |
| Your entries leave the browser | Never | Varies |
More converters
Every converter on the site runs in your browser, needs no sign-up, and sends nothing anywhere.
Length9
Millimetres to miles and every step between, metric and imperial, exact and with ruler fractions.
km to miles
Kilometres to miles with race presets from 5K to 100K and the pace per km and per mile.
Open km to miles →Miles to km
Statute, US survey or nautical miles to kilometres, with mph to km/h and the mile on a track.
Open miles to km →Length converter
mm, cm, m, km, inches, feet, feet and inches, yards and miles, all at once, exact, saying when it rounds.
Open length converter →Height converter
cm to feet and inches and back, rounded on the total so never 5 ft 12 in, with decimal feet caught.
Open height converter →cm to inches
Centimetres to inches as a decimal and the nearest 1/16 inch on a ruler, with the gap in mm.
Open cm to inches →Inches to cm
Inches and fractions to centimetres, exact, with a screen's 16:9 width and height from its diagonal.
Open inches to cm →mm to inches
Millimetres to decimal inches, the nearest 1/16, 1/32 and 1/64 with the gap, and thou.
Open mm to inches →Inches to mm
Fractions such as 3/8 or 5-3/8 to exact millimetres, with the nearest whole and half mm.
Open inches to mm →Feet to metres
Feet, or feet and inches, to metres at 0.3048, and what the retired US survey foot would change.
Open feet to metres →
All 13 converters, by category: Length (10) · Temperature (1) · Cooking (1) · Currency (1)
Frequently asked questions
How many feet is 1 metre?
One metre is 3.28 feet (3.2808398950… exactly), which is 3 ft 3.37 in, or 3 ft 3 3/8 in to the nearest eighth. A metre is therefore a little over 3 inches longer than a yard, which is 3 feet.
How do you convert metres to feet?
Divide by 0.3048, or multiply by 3.2808. 5 m × 3.2808 = 16.40 ft. For feet and inches, multiply the decimal part by 12, using the unrounded figure: 5 m is 16.4042 ft, and 0.4042 × 12 = 4.85, so 16 ft 4.9 in. Rounding to 16.40 first would give 4.8 in. For a rough figure, multiply by 3 and add 10%.
Is 5.74 feet 5 foot 7?
No. 5.74 feet is five feet and 74 hundredths of a foot, and 0.74 × 12 = 8.9 inches, so it is 5 ft 8.9 in. It is the height 1.75 m. Decimal feet are not feet and inches written with a point, a mix-up this converter avoids by showing both.
How many feet is 2.4 metres?
2.4 m is 7.87 feet, which is 7 ft 10.5 in, or 7 ft 10 1/2 in to the nearest eighth. It is the standard ceiling height in new UK and Australian homes, about an inch and a half lower than the 8-foot ceiling common in the US.
How many feet is 100 metres?
100 metres is 328.08 feet, or 328 ft 1 in. A 100 m sprint is therefore about 109 yards, a little longer than an American football field’s 100 yards between the goal lines. 400 m, one lap of a track, is 1,312.34 feet.
How many feet is 10 metres?
10 metres is 32.81 feet, or 32 ft 9.7 in. It is the height of the Olympic diving platform. To get feet and inches from 32.81, keep the 32 and multiply 0.81 by 12 to get about 9.7 inches.
How many square feet is a square metre?
One square metre is 10.7639 square feet, the length factor squared: 3.2808 × 3.2808. A 20 m² room is about 215 square feet. Multiplying an area by 3.28 instead gives a figure about three times too small.
Related guides
Where metres and feet meet in a pool.