Unit converter · Free · No sign-up

Temperature Converter

Short answer

Use °F = °C × 9/5 + 32, K = °C + 273.15 and °R = °F + 459.67. 72 °F is 22.22 °C (exactly 22 2/9) or 295.37 K. A change in temperature converts without the offset: a rise of 10 °C is a rise of 18 °F, not 50 °F. This converter does both, with the working.

Any of the four scales, both ways.

72 °F =22.22 °CRounded to 2 decimal places; exactly 22 2/9 (its decimals never end).

Mental shortcut: take off 30 and halve it gives 21 °C, 1.22 °C too low.

  1. °C = (°F − 32) × 5/9.
  2. 72 − 32 = 40.
  3. 40 × 5/9 = about 22.2222.
  4. So 72 °F = 22.22 °C (rounded to 2 decimal places).
The same temperature on all four scales
UnitValue
Celsius (°C)22.22 °C
Fahrenheit (°F)72 °F
Kelvin (K)295.37 K
Rankine (°R)531.67 °R

The figures above are an example: put in your own. A unit typed after the number is fine if it matches From. Worked out in this browser and kept there; nothing is sent anywhere. Only one direction? Use Celsius to Fahrenheit or Fahrenheit to Celsius.

Type a temperature, choose the scale it is in and the one you want, and read the answer with its working. Switch to A difference when the number is a change, such as a rise of 3 degrees.

A temperature converter rewrites a temperature from one scale in another: Celsius, Fahrenheit, kelvin or Rankine. Because the scales start from different zeros, a reading and a change in temperature convert differently.

  • No sign-up
  • Nothing uploaded
  • Shows the working
  • Works offline
  • Exact, no rounding until shown

Key facts

Temperature converter at a glance
DetailAnswer
ScalesCelsius (°C), Fahrenheit (°F), kelvin (K), Rankine (°R)
Example72 °F = 22.22 °C (exactly 22 2/9) = 295.37 K
Key constants273.15 (K from °C), 32 and 9/5 (°F from °C), 459.67 (°R from °F), all exact
Temperature changesA separate mode: 10 °C warmer is 18 °F warmer
RefusesReadings below absolute zero, with a message
Where your numbers are keptThis browser only

How to convert a temperature

Enter the number, pick the scales, and read the working; the steps are the same by hand.

  1. Type the temperature

    Negative numbers and decimal commas are fine: −40, 98.6 or 37,5.

  2. Choose From and To

    Celsius, Fahrenheit, kelvin or Rankine.

  3. Say whether it is a reading or a change

    A change, such as “3 degrees warmer”, converts without the offset.

  4. Pick the decimal places

    0 to 6; the result says when it has been rounded.

  5. Read the working

    The formula, then each step with its numbers.

  6. Check the other scales

    The table shows the same temperature on all four.

Who converts temperatures

Anyone reading a number written for someone else’s scale.

  • Travellers

    A forecast or a thermostat in the scale they did not grow up with.

  • Cooks

    Oven settings from American or European recipes.

  • Students

    Kelvin for gas laws and thermodynamics homework.

  • Engineers

    Rankine in older US thermodynamics tables.

  • Heating and cooling

    Setbacks and temperature rises, which are changes, not readings.

  • Parents and carers

    A thermometer in °F against advice written in °C.

A temperature or a change in temperature?

Every temperature converter answers one question: what does this reading say on the other scale? Half the temperatures people convert are not readings. “Warmer by 10 degrees”, “a rise of 1.5 °C”, “turn the thermostat down 8 °F” and “the oven runs 15 degrees hot” are all changes, and a change converts without the offset. Put 10 °C into the reading formula and you get 50 °F; a day that is 10 °C warmer is 18 °F warmer.

The same change converted as a reading (wrong) and as a difference (right)
ChangeAs a reading (wrong)As a difference (right)
A 1.5 °C rise (the Paris Agreement limit)34.7 °F2.7 °F
A day 10 °C warmer than yesterday50 °F18 °F
A fever 1 °C above normal33.8 °F1.8 °F
A thermostat turned down 8 °F−13.33 °C4.44 °C
A 5 °C change, in kelvins278.15 K5 K

The reason is in where the scales put their zero. Celsius and Fahrenheit start from different points, which is what the +32 accounts for, but a difference has no starting point: only the size of the degree matters, and a Fahrenheit degree is 5/9 of a Celsius degree. So a change in °C times 9/5 is the change in °F, with nothing added. A kelvin is exactly the size of a degree Celsius, so a change of 5 °C is a change of 5 K, never 278.15 K. NIST’s guide to the SI says the same thing in its rules for writing units: temperature intervals may be expressed in degrees Celsius or in kelvins, and the number is the same in both.

Choose A difference (a change) under “The number is” and the converter drops the offset, says so in the result, and shows the one multiplication that is left. A difference may also be negative at any size, so the absolute-zero check is switched off in that mode.

The four scales side by side

Four scales are in everyday or engineering use, and they differ in only two ways: where zero sits, and how big one degree is. Celsius and kelvin share a degree size, as do Fahrenheit and Rankine. Kelvin and Rankine are the absolute scales: their zero is absolute zero, so they never go negative, and a temperature can be doubled on them in a way it cannot on Celsius (20 °C is not twice as hot as 10 °C; 293.15 K against 283.15 K is the honest comparison).

Landmark temperatures on all four scales (computed by the converter above)
Landmark°C°FK°R
Absolute zero−273.15 °C−459.67 °F0 K0 °R
Where °C and °F agree−40 °C−40 °F233.15 K419.67 °R
Water freezes (sea-level pressure)0 °C32 °F273.15 K491.67 °R
A comfortable room20 °C68 °F293.15 K527.67 °R
Traditional normal body temperature37 °C98.6 °F310.15 K558.27 °R
Water boils (sea-level pressure, about)100 °C212 °F373.15 K671.67 °R

The kelvin is the SI base unit. Since 20 May 2019 it has been defined by fixing the Boltzmann constant at exactly 1.380 649 × 10−23 J/K, and the degree Celsius is defined from it: a Celsius temperature is the kelvin temperature minus 273.15 K, by definition. That is why the converter treats 273.15 as exact, not as a measured value. Fahrenheit is defined from Celsius in turn (× 9/5, + 32), and Rankine is Fahrenheit counted from absolute zero, 459.67 °F below the Fahrenheit zero. A kelvin is written without the word “degree”: “300 K”, said “300 kelvins”.

Every formula between the four scales

Every pair of the four scales, with the formula the converter uses and one worked figure. They are the forms NIST gives in its table of conversion factors (it writes 9/5 as 1.8), rearranged so each starts from the unit you have. The converter keeps 5/9 as a fraction rather than 0.5556, which is why its answers do not drift in the third decimal.

Formulas between Celsius, Fahrenheit, kelvin and Rankine
ConversionFormulaExample
Celsius to Fahrenheit°F = °C × 9/5 + 32100 °C = 212 °F
Celsius to kelvinK = °C + 273.15100 °C = 373.15 K
Celsius to Rankine°R = (°C + 273.15) × 9/5100 °C = 671.67 °R
Fahrenheit to Celsius°C = (°F − 32) × 5/9100 °F = 37.78 °C
Fahrenheit to kelvinK = (°F + 459.67) × 5/9100 °F = 310.93 K
Fahrenheit to Rankine°R = °F + 459.67100 °F = 559.67 °R
Kelvin to Celsius°C = K − 273.15300 K = 26.85 °C
Kelvin to Fahrenheit°F = K × 9/5 − 459.67300 K = 80.33 °F
Kelvin to Rankine°R = K × 9/5300 K = 540 °R
Rankine to Celsius°C = °R × 5/9 − 273.15300 °R = -106.48 °C
Rankine to Fahrenheit°F = °R − 459.67300 °R = -159.67 °F
Rankine to kelvinK = °R × 5/9300 °R = 166.67 K

For a change in temperature the same table applies with the added and subtracted constants left out: multiply by 9/5 going to Fahrenheit or Rankine, by 5/9 coming back, and by 1 between Celsius and kelvin.

Does water really boil at 100 °C?

“Water boils at 100 °C” is how most people learn the Celsius scale, and it is no longer quite true. Anders Celsius’s own scale of 1742 ran the other way, with 0 for boiling and 100 for freezing, and was turned round soon after his death. Water’s boiling point stopped defining the scale in 1954, when the kelvin was tied to the triple point of water instead; since 2019 it has been tied to the Boltzmann constant. Measured on the International Temperature Scale of 1990, pure water at one standard atmosphere boils at about 99.97 °C, a few hundredths below the round number.

Pressure matters far more than that. Water boils at a lower temperature as you climb, roughly one degree Celsius for each 300 metres, which is why high-altitude recipes change baking times and temperatures. Freezing is barely affected by pressure, and 0 °C remains a good figure for ice in water. None of this changes the conversion: 100 °C is 212 °F exactly, whatever water does at that temperature.

One more fixed point is worth knowing: −40. It is the only temperature with the same number on the Celsius and Fahrenheit scales, because −40 × 9/5 + 32 = −40. Type −40 into the converter with From set to Celsius and To set to Fahrenheit and the working shows it.

What this converter does not do

This converts numbers between scales; it does not measure anything. It does not calibrate a thermometer, correct for altitude, or work out wind chill, heat index or “feels like” temperatures, which depend on wind and humidity as well. Historical scales such as Réaumur and Delisle are not included. A reading below absolute zero (0 K, −273.15 °C, −459.67 °F) is refused, because no such temperature exists; a difference can be any size. Numbers up to a million million are accepted, with up to six decimal places shown; the arithmetic is exact, and the rounding is stated on every result.

What this converter does and does not do
It doesIt does not
Convert °C, °F, K and °R, both waysInclude Réaumur, Delisle or Newton
Convert a temperature change without the offsetWork out wind chill or heat index
Show the formula and each stepRound in the middle of the working
Keep your entries in this browserSend anything anywhere

This converter or a one-number one

What this page adds to a typical one-number converter.

This temperature converter compared with a typical one
 This converterA typical converter
CostFree, no sign-upFree, often with ads over the result
Temperature changesA separate mode, no offsetReading formula only
Shows the workingFormula and every stepThe answer alone
Exact resultsFractions kept: 22 2/9 °CFloating point, rounded silently
Below absolute zeroRefused, with a reasonOften converted anyway
Your entries leave the browserNeverVaries

More converters

Every converter on the site runs in your browser, needs no sign-up, and sends nothing anywhere.

All 13 converters, by category: Length (10) · Temperature (1) · Cooking (1) · Currency (1)

Frequently asked questions

How do you convert Celsius to Fahrenheit?

Multiply the Celsius temperature by 9/5, which is 1.8, then add 32. For 25 °C that is 25 × 1.8 = 45, plus 32 = 77 °F. Going the other way, subtract 32 and multiply by 5/9. For a change in temperature, such as 5 degrees warmer, multiply by 1.8 and do not add 32.

What is the formula for Kelvin?

Kelvin is Celsius plus 273.15, so 25 °C is 298.15 K and 0 K is −273.15 °C. From Fahrenheit, add 459.67 and multiply by 5/9. The 273.15 is exact by definition, not a measurement, so the converter keeps every decimal. Kelvins are written without a degree sign: 300 K.

Can a Kelvin temperature be negative?

No. Zero kelvin is absolute zero, the lowest temperature possible, so every real temperature is 0 K or more. The same is true of Rankine. A temperature change can be negative in kelvins, such as a fall of 5 K, which is why the converter’s difference mode accepts negative numbers and its reading mode refuses anything below absolute zero.

What is the Rankine scale used for?

Rankine is an absolute scale with Fahrenheit-sized degrees: 0 °R is absolute zero and water freezes at 491.67 °R. It appears in older American engineering, especially thermodynamics and gas tables written in US customary units. To get Rankine, add 459.67 to a Fahrenheit temperature, or multiply kelvins by 9/5.

At what temperature are Celsius and Fahrenheit the same?

At −40. Putting −40 °C into the formula gives −40 × 9/5 + 32 = −72 + 32 = −40 °F. It is the only point where the two scales agree, because their degrees are different sizes and their lines cross just once. Kelvin and Celsius never agree; they are always 273.15 apart.

Why is a 1 degree Celsius change 1.8 degrees Fahrenheit?

Because a Fahrenheit degree is smaller. Between freezing and boiling water there are 100 Celsius degrees and 180 Fahrenheit degrees, so one Celsius degree is 180/100 = 1.8 Fahrenheit degrees. A change carries no offset, so a rise of 1 °C is a rise of 1.8 °F, not 33.8 °F, which is what the reading formula would give.

Is it degrees Kelvin or kelvins?

Kelvins. The degree sign and the word “degree” were dropped from the kelvin in 1967, so a temperature is written 300 K and read as 300 kelvins. Celsius, Fahrenheit and Rankine keep their degree sign. A difference in Celsius may be written in °C or in K; the number is the same.

What is absolute zero in Fahrenheit and Celsius?

Absolute zero is −459.67 °F, −273.15 °C, 0 K and 0 °R. All four figures are exact, because the scales are defined from one another. Nothing can be colder, and the converter refuses a reading below it rather than printing a temperature that cannot exist.

Open the temperature converter

Free, no sign-up, and what you enter stays in your own browser.